|Information content:Data||Certification:CE, RoHS|
|Specification:CE, FCC, ROHS||Origin:Shenzhen, Guangdong, China|
1 port Slave coaxial cable network unit is a HUA-NETAtheros 6400 /7400 chip scheme EOC (Ethernet over Coax) Slave which can be networking with Master coaxial cable terminal (Master). They can build Layer-2 Ethernet transmit network through cable television coaxial cable and meanwhile have no influence on the pre-existing CATV signal transmit.
1 port Slave provides four 100M full-duplex Ethernet interfaces that can be simultaneously connected to terminals such as computer, set-top box of digital television, IP phone, etc. It supports QoS set up and can provide corresponding transmit guarantee of priority level for data stream of different service types. It supports bandwidth control. Maximum Uplink bandwidth of every 1 port Slave can be set up in order to prevent the attack to the whole coaxial transmit network when devices of other customer premises network go wrong or artificial attack happens. Encrypted transmit is also available to satisfy the service need of high reliability.
Provides one 10/100M autosensing Ethernet interfaces to connect devices such as computer, set-top box, IP phone, etc.
Provides 2 Cable interfaces to separately connect Uplink and Downlink Cable line
Built-in CATV signal split filter
Occupies Low Frequency Band . No influence on the pre-existing CATV signal
No user profile needed. Plug and play
Supports VLAN configuration
1 10/100M autosensing Ethernet interfaces (Auto MDI/MDIX)
2 metric thread Cable interfaces
1 external power interface
Frequency range: 7.5--30MHz/7.5--65MHZ Maximum output power: 15 dBm Receiving sensibility: -65 dBm
Interface type: F type female connector socket
Output impedance: 75Ω
IEEE 802.3, IEEE 802.3x, IEEE 802.3u Auto MDI (X)
Supports VLAN, QoS
Rate of Physical layer: 200Mbps
Throughput of MAC layer: 100Mbps
OFDM 1024/256/64/16/8-QAM, QPSK, BPSK
128-bit AES encrypted
155 (length) * 108 (width) * 27 (height)