Ruijie Rg-Ap320-I High Performance Wireless Indoor Ap

- Dec 27, 2017-

Basic Info

  • Model NO.:RG-AP320-I

  • Type:WiFi Module

  • Work Mode:AP+STA

  • WiFi Antenna Type:Built-in

  • Transmission Rate:600Mbps

  • Voltage:48V

  • Antenna Gain:5dBi

  • Color:White

  • Certification:ISO9001, CE, Sirim

  • Brand Name:Ruijie Networks

  • Model Number:Rg-Ap320-I

  • Product Type:Poe Access Point

  • Radio:Dual

  • Protocol:Concurrent 802.11b/G/N and 802.11A/N

  • Operating Bands:2.4GHz and 5GHz

  • Patial Streams:2

  • Max Throughput:300Mbps Per Radio and 600Mbps Per Ap

  • Antenna:Built in with an X-Sense Smart Antenna Array(Compo

  • Service Port:One 10/100/1000base-T Uplink Port (Support Poe)

  • Specification:CE, SIRIM

  • Origin:Fujian, China (Mainland)

Product Description

RG-AP320-I poe access point
X-Sense Smart Antenna
1. Full coverage based on 16.77 million signal paths
2. Automatic adjustment for best signals
3. Signal strength multiplied by 3 times with the same power supply
4. Smart device access optimization design, more suitable for mobile phone and tablet PC
5. Interference reduction by 30% for easier deployment
High-Speed Wireless Performance with Sustainability
1. Adopts dual-band, dual-radio design and delivers an access rate up to 600 Mbps
2. The AP provides high-speed wireless access and saves 25% power
3. Industry-leading local forwarding technology

Hardware Specifications
ProtocolConcurrent 802.11b/g/n and 802.11a/n
Operating Bands2.4GHz and 5GHz
AntennaBuilt in with an X-Sense Smart Antenna array, which is composed of 16 antennas
Spatial Streams2
Max Throughput300Mbps per radio and 600Mbps per AP
ModulationDSSS: DBPSK@1Mbps,DQPSK@2Mbps,CCK@5.5/11Mbps
OFDM: BPSK@6/9Mbps, QPSK@12/18Mbps, 16-QAM@24Mbps, 64-QAM@48/54Mbps
Receiver Sensitivity11b: -96dBm(1Mbps), -91dBm(5.5Mbps), -89dBm(11Mbps)
11a/g: -91dBm(6Mbps), -85dBm(24Mbps), -80dBm(36Mbps), -74dBm(54Mbps)
11n: -88Bm@MCS0, -70dBm@MCS7, -89dBm@MCS8, -68dBm@MCS15
Transmit Power≤ 100mW (20dBm, transmit power of the RF card only)
Adjustment Power1dBm
(W x D x H)  (mm)
205 × 205 × 42 (The height does not include the height of the antenna connector or bracket)
Service PortOne 10/100/1000Base-T Ethernet uplink port (supporting PoE)
Management PortOne console port
LED IndicatorsOne LED (red, green, blue, orange, and flashing modes, breathing flashing mode for smart device access, and silence can be disabled)
Power SupplyDC power adapter (supporting48 VDClocal power supplies)
802.3af PoE
Max Total Power11W
EnvironmentalOperating temperature: –10°C to +50°C
Storage temperature: –40°C to +70°C
Operating humidity: 5% to 95% (non-condensing)
Storage humidity: 5% to 95% (non-condensing)
Installation ModeCeiling/wall-mountable
IP RatingIP41
Safety StandardsGB4943 and EN/IEC 60950-1
EMC StandardsGB9254 and EN301 489
HealthEN 62311
Radio StandardsModel of approved wireless radiation devices, EN300 328, and EN301 893
Wi-Fi Alliance CertificationYes
Software Functions
WLANMaximum number of stations per AP256
Virtual APA maximum of 32 SSIDs
SSID hidingYes
Configuring the authentication mode, encryption mechanism, and VLAN attributes for each SSIDYes
WDS (bridge mode)Yes
Remote Intelligent Perception Technology (RIPT)Yes
Intelligent identification of smart deviceYes
Intelligent load balancing based on the number of users or trafficYes
STA limitSSID-based
Bandwidth limitSTA/SSID/AP-based rate limit
Preference 5GHz (band select)Yes
SecurityPSK, Web, and 802.1x authenticationYes
Data encryptionWPA (TKIP), WPA2 (AES), WPA-PSK, and WEP (64 or 128 bits)
QR code authenticationYes
SMS authenticationYes
PEAP authenticationYes
Data frame filteringWhitelist, static blacklist, and dynamic blacklist
User isolationYes
Rogue AP detection and countermeasureYes
Dynamic ACL assignmentYes
CPU Protection Policy (CPP)Yes
Network Foundation Protection Policy (NFPP)Yes
RoutingIPv4 addressStatic and dynamic IP address
IPv6 CAPWAP tunnelYes
IPv6 addressManual or automatic
IPv6 tunnelManual or automatic
MulticastMulticast to unicast conversion
Management and MaintenanceNetwork managementSNMP v1/v2C/v3;
Telnet, SSH, TFTP, and FTP
and Web management
Fault detection and alarmYes
Statistics and logsYes
Switching between the FAT and FIT modesThe AP working in FIT mode can switch to the FAT mode through the RG-WS wireless AC;
The AP working in FAT mode can switch to the FIT mode through a local console port or Telnet.

Previous:Isigal Indoor Wireles Ap for Hotel Atheros Ar9341 CPE/Bridge Next:2.4GHz Wireless Digital Network Bridge/Ap with 2.4GHz Omni Fiberglass Antenna