Pocket 3G WiFi Route (A7625)

- Aug 31, 2016 -

Basic Info

Model NO.:A7625Usage:Computer, Mobile phone, Laptop, Tablet PC
Type:WirelessSupport Network:3G
Information content:DataPackage:Gift Box
Specification:CEOrigin:Shenzhen

Model: A7625
Specifications
1.3G WiFi router SIM slot, Supporting WCDMA HSPA+/CDMA EVDO
2. Works for WCDMA/HSUPA/GSM/EVDO CDMA 1X
3. Automatic identification of Global APN
4. Built in SIM card Slot


3G chip MSM7625
Wireless Standard IEEE802.11b/g/n
Wireless Rate 150Mbps
3G Data Service
HSDPA/UMTS/2100MHz, GSM/GPRS/EDGE/850/900/1800/1900MHz 7.2Mbps download 5.76M upload.
CDMA 800MHz, data transmission up to 3.1 Mbps with CDMA 1X 236K
Battery Capacity 1500mAh Working time About 4hours
Interface 1× MicroUSB Port
Antenna Built-in omni-directional antenna
Operation Mode AP, 3G Router, Wireless Router
Wireless Security 64/128-bit WEP, WPA/WPA2, WPA /WPA2-Personal (TKIP/AES)
Operating Temperature 0° C~40° C (32° F~104° F)
Storage Temperature -40° C~70° C (-40° F~158° F)
Relative Humidity 10% ~ 90%, Non-condensing
Storage Humidity 5%~95%, Non-condensing
Dimensions 99.7mm*53.7mm*13.9mm (L x W x H) 80g

How to Use The Device

1. Charging Device if battery is low on power
2. Insert the (U)SIM card into the (U)SIM card holder
2. Insert the battery with the contacts located against the metal springs, and press the battery down into the case.
3. Power on your device directly. It will take 1~2 minutes to initialize, and then WI-Fi LED will blink.
4. Use your normal Wi-Fi application on the client to search the available wireless network.
5. Select the SSID of your device, and then click Connect
6. Wait for a few moments. The connection between your device and the client will be established successfully.

You can also establish a connection between your Wi-Fi device and the client via USB Cable instead of Wi-Fi

4G LTE Router


3G WCDMA Router, 42Mbps high speed dc-hspa+ router for wireless M2M

Previous:4G Router Antenna Indoor High Gain 4G Lte Antenna for 2g 3G WiFi Router Next:2g/3G/4G Lte Wireless Router (CPE, Model P10)