Wireless AP is located for wireless terminal access, local forwarding, 802.11a / b / g / n / ac protocol support, RF signal transceiving and radio frequency scanning.
Wireless AP is the wireless network access point for the end user to provide wireless terminal access, to achieve massive wireless terminal access, it should support the current mainstream 802.Wireless AP 11ac technology, should have 2.4G and 5G dual-band technology, should have intelligent Antenna, support spectrum navigation, spectrum protection, packet by power control, intelligent load balancing and other features.
The general layout of the scene, including corridors, offices, indoor vacant scenes, etc., recommended the use of ordinary AP, according to the size of the deployment of one or more AP, the POE switch.
High-density area mainly refers to the hotel lobby, Wireless AP restaurant, banquet hall, large conference room, event hall and other staff-intensive location, such personnel density, access terminal, AP need to have a larger maximum number of access terminals. Therefore, we recommend that in such a location according to the size of the area directly select the high-density AP, the use of decentralized installation, Wireless AP the uplink POE switch.
Such as "tri-band coverage optimization technology": 2.4GHZ and 5GHZ band; third frequency for the actual access terminal type to support the number of 5GHz more, the RF can be configured into 5GHz band, thereby improving the 5GHz access users Quantity and bandwidth capacity, Wireless AP on the contrary, 2.4GHz terminal can be configured to 2.4GHz, the network form is very flexible.
Indoor high-density AP built-in antenna array, Wireless AP small and beautiful appearance, flexible installation, suitable for wall, ceiling and other installation methods.
Outdoor area wireless coverage mainly need to consider the complexity of the surrounding environment, but also need to consider a series of AP lightning protection, waterproof, Wireless AP working temperature and other related control, need to configure high-power POE injection unit power supply.
Different building materials produce different transmission effects. Buildings made of metal frames or doors make the transmission distance of WLAN wireless signals smaller. Place the AP in place so that the signal passes through a dry wall or an open door to avoid placing the signal so that the signal must pass through the metal material and away from the electronic equipment (at least 1 to 2 meters), Wireless AP such as a microwave oven, a monitor, a motor.
For the presence of multiple indoor coverage systems in the indoor area, Wireless AP the frequency bands used by other communication systems should be taken into account, Wireless AP and the necessary protection bands should be reserved to meet the requirements of the interference protection ratio.
Indoor AP coverage frequency allocation should take full advantage of the internal structure of the building, Wireless AP from the perspective of the flat and adjacent floors to avoid the area covered by each AP on the horizontal and vertical adjacent areas may exist interference.