Wireless Routers Hardware Configuration

- Oct 31, 2017 -

1, the wireless route has NAT address translation (allowing multiple people to share the Internet) and DHCP (automatically assigned to the terminal device IP address), and most wireless AP does not have the above two functions, Wireless Routers namely: wireless AP is equivalent to the wireless switch, can not put Instead of routing the exit of the network.

2, wireless AP support PoE power supply,Wireless Routers reducing the complexity of strong electric construction.

3, wireless AP support centralized management, batch upgrade to the AP, restart, modify the password and SSID and other operations, in the larger number of AP projects, Wireless Routers the advantages reflected more clearly.

General wireless AP is for the enterprise and the unit market, and a few hundred dollars of wireless routing is family oriented. So the configuration and quality differences, the general home wireless router can carry wireless clients (laptops, mobile phones, pad, etc.) in about 10, Wireless Routers when the number of terminals continue to increase, slow speed, frequent dropped calls and other issues will follow While the professional wireless AP can carry wireless clients in 30 or more, due to the use of a higher performance hardware configuration, both forwarding performance and stability are stronger than the wireless router.

The wireless route has the DHCP function. When the wireless route is cascaded with the Lan port, the DHCP function of this wireless route conflicts with the DHCP function of the outgoing route, Wireless Routers which causes the IP address of the incoming route to be allocated to the wireless router.

Since the DHCP function of the wireless route is enabled by default, the wireless route is initialized and the conflict is generated. When the wireless route is deployed in large numbers, Wireless Routers it is more difficult to locate the fault location.

Wireless routing has not less than four of the Lan port, when the wall from two different locations connected to the network cable is also mistakenly inserted in the wireless routing Lan port, Wireless Routers they formed a network loop, then the entire network A large number of unwanted useless data packets, the network facing the danger of broken network. Most of the wireless AP only one interface, reducing the risk of causing the loop.

The wireless ap is a wireless access point. Wireless Routers Its role is to access it into the wired network after the cable signal into a wireless network, notebook or computer by receiving it to send the signal access wireless wifi LAN. This is somewhat similar to a switch or wireless hub.

Mainly for broadband families, inside the building and within the park, the typical distance covering tens of meters to 100 meters, the main technology for the 802.11 series. Wireless Routers Most wireless APs also have an access point client mode (AP client) that can be wirelessly connected to other APs to extend the coverage of the network.

Wireless AP can be divided into two categories: simple AP and extended AP. Simple AP is what we generally call the wireless ap. The working principle of the wireless AP is that the network signal is transmitted through the twisted pair. The wireless AP compiles the signal regardless of the signal, Wireless Routers converts the electrical signal into the radio signal and forms the coverage of the wireless signal. It is equivalent to the wireless switch, only provides the function of wireless signal transmission. Wireless Routers Extended AP is what we often say that the wireless router. Wireless Routers Through the wireless router, home adsl broadband users can achieve Internet connection sharing, but also to achieve residential broadband wireless access.

Previous:4G Routers Interfaces And Endpoints Next:Wireless Modems Installation